Yup! You can use the Lumos app to turn off the front and rear lights while still being able to use the turn signals. You can also turn off just the front lights or vice versa if you choose to do so.
- Turn on your Lumos helmet and make sure it’s paired with the app.
- Launch the Lumos app.
- On the Dashboard, select the light setting (1, 2, or 3) you want to change and overwrite. Then remove the dashes that are displayed in the ‘Front Lights’ and/or ‘Rear Lights’ fields. Leaving a straight line, you get a solid light. Removing all dashes, the lights are off.
Tip: The more dashes you remove, the slower the flashing. One dash translates into one very quick flash.
Please note that for the Matrix helmet you don't have any possibility to customise the lights and you cannot use the turn signals only. The light settings on the dashboard are disabled (This function is not available for this helmet).
On My Ultra i can have the lights off and use the turn signals following this method BUT the lights automatically turn on when the turn signal is active. It's weird.
The break sensor and the turning lights all turn on the lights.
I have the same issue. The lights turn automatic on with the turn signal lights.
The described procedure didn't change anything for my Lumos kickstart helmet.
Anyway to enable only the front light and turn signal on the matrix. In other words nothing on rear display except turn signals. Thanks
Same problem here. Even if I turn off all lights, when I use the turn signals, lights go on and do so in boost mode. Is there any way to disable that behavior?
Please sign in to leave a comment.