The Mounting/Press-To-Release clips were explicitly designed to give you extra peace of mind during bumpy rides. This optional accessory prevents the Firefly lights from falling out from the Universal Mount if it ever does pop off. While we have tested the units vigorously and the magnets we use are strong, we highly recommend you use the clips as a safety measure.
*Please NOTE that we cannot take responsibility on the off chance that they pop off mid-ride if you DO NOT use the Press-To-Release Clips. We are only able to cover this as part of our warranty replacement if these clips were used and the mount/Firefly unit still managed to drop*
-
To use the Mount "press to release" Clips, simply insert them into the side of the Universal Mount as shown in the video below. The hook on the clip should align with the opening on the side of the Universal Mount. You'll need to install both clips for this to work as intended.
-
Now when you place a Firefly into the Universal Mount, you need to be able to feel the clips engage. You also may need to push the Firefly in to secure it fully.
-
To remove Firefly, press both clips at the same time. Feel free to keep the clips attached if you prefer to do so. The Universal Mount was designed to work both with and without the clips.
-
If you ever need to remove the clips, simply use a thin object to push both ends of the clips out of the Universal Mount.
Comments
0 comments
Please sign in to leave a comment.