Welcome to Lumos Snapix! Here’s how to get your helmet ready, use its everyday controls, and personalize your lights.
What’s in the box?
- Lumos Snapix helmet
- Quick Start Guide
- User Manual
- Three reflective stickers
* A charging cable is not included.
Before your first ride
· Charge your helmet
Charge Snapix before using it for the first time. A full charge takes approximately 4 hours.
· Check the fit
Make sure the helmet fits securely, the straps are adjusted, and the magnetic buckle is fully fastened. For sizing and fitting instructions, see Choosing the right size and fitting your Snapix.
Check that the lights are working before heading out.
Use the power button
| What you want to do | What to do |
| Turn the helmet on | Press and release the power button once. |
| Change the lighting scene | While the helmet is on and displaying its lights normally, press the power button once. |
| Turn the helmet off | Press and hold the power button until the helmet shuts down. |
| Turn off the rear light | While the helmet is on, press the power button three times quickly. |
| Restore the rear light | If you switched it off with a triple press, press the power button once or three times quickly to restore its previous lighting pattern. |
After you switch off the rear light with a triple press, the next single press restores the rear light instead of switching to the next scene.
· Three preset lighting scenes
Snapix comes with three preset scenes:
Scene | Lighting |
Always On | Steady lighting |
Night Ride | Faster flashing |
Day Ride | Slower flashing |
Switch between these scenes using the helmet’s power button. To personalize your lighting, use the Lumos app.
Check the battery level
When you turn Snapix on or off, a colored indicator shows the approximate battery level.
Color | Battery level |
Red | Low |
Orange | Medium |
Green | High |
If the battery runs out during use, the helmet beeps five times and switches off. Recharge it before using the lights again.
· How long does the battery last?
Scene | Approximate battery life |
Always On | 4 hours |
Night Ride | 10 hours |
Day Ride | 12 hours |
Battery life varies depending on the lighting pattern and brightness settings.
Make it yours with the Lumos app
Install the latest Lumos app to pair your Snapix, customize its lights, and set up supported sync features with compatible Lumos devices.
The front light stays white, while the rear light offers RGB color options. Follow the in-app guides to explore the settings, and install firmware updates when prompted.
For detailed App instructions, visit Ride Lumos App in our Help Center.
Remote compatibility: Snapix does not pair with Lumos remotes. It does not support turn signals or automatic brake lights.
Need a hand?
See Snapix troubleshooting & FAQs for help with common questions.
Comments
0 comments
Please sign in to leave a comment.