Save drafts and arrange your active scenes

Your Lumos devices store three scenes at a time, but you can keep more scenes as drafts in the app.

Use drafts to save different lighting setups, then choose which three you want on your devices. Swapping in a new scene does not mean deleting an old favorite.

Active scenes and drafts: what’s the difference?

Open Customize to see both groups.

Editing a draft does not change your devices’ current lighting. This also applies when you use Apply to copy settings between devices within that draft.

Keep three scenes on your devices and save additional setups as drafts in the app.

Create a draft

1. Open Customize.
2. Tap + next to Draft scenes.
3. Enter a name, such as My Commute, and tap Done.
4. Choose Start from scratch, or select an existing scene as your starting point.
5. Tap Done, then configure the devices within the new draft.

Starting from an existing scene gives you a separate draft to work on without changing the original.

Before activating a draft, check the lighting settings for each device—especially if you started from scratch.

For the editing steps, see Customize a scene and apply changes to other devices.

Move a draft onto your devices

Before you begin, turn on and connect all the helmets and lights you want to update. Complete any available firmware updates first.

1. Open Customize and tap Arrange Scenes.
2. Find the draft you want to use.
3. Use the drag handle beside its name to move it into the upper group of three active scenes.
4. Check the final three scenes and their order.
5. Tap Done.
6. Wait for the app to finish saving the changes to your connected devices.

Dragging changes the arrangement on screen. Tap Done to save that arrangement to your devices.

What happens to the scene that moves out?

Your devices still have three active scenes. When a draft moves into the active group, the scene pushed out of that group moves into Draft scenes.

It is not deleted. You can move it back into the active group later.

Always check the final three scenes before tapping Done, so you keep the ones you want on your devices.

Move a draft onto your devices：https://youtube.com/shorts/sIOLLcZ9-CI

Move a draft into the active group, check your three scenes, then tap Done to save them to your devices.

Change the order of your active scenes

The order in Arrange Scenes, from top to bottom, is the order your devices use when cycling through scenes.

1. Open Arrange Scenes.
2. Drag the active scenes into your preferred order.
3. Tap Done and wait for saving to finish.

With your devices powered on, press the power button once on a helmet or light to move to the next scene. After the third scene, the cycle returns to the first.

The app displays the current scene on Dashboard. It does not switch scenes for you.

Check that the arrangement reached your devices

After saving:

• Confirm that your chosen scenes appear in the active group in Customize.
• Use a helmet or light’s physical power button to cycle through all three scenes.
• Check that each connected device uses the lighting settings you expected.

A device that was offline cannot receive the new arrangement immediately. Turn it on, reconnect it to the app, and follow any synchronization prompt before checking its scenes.

If the app reports that some devices did not update, do not assume the whole setup has received the new arrangement. Check the affected devices and follow the on-screen guidance.

For more help, see My devices aren’t syncing or my scene changes aren’t showing.

Rename a scene

You can rename both active scenes and drafts.

1. Open the scene in Customize.
2. Tap the three-dot menu in the upper-right corner.
3. Choose Rename.
4. Enter the new name and confirm.

Renaming a scene changes its label, not its lighting settings.

Delete a draft

Deleting a draft is permanent. It cannot be recovered.

You do not need to delete a scene just to make room on your devices—keep it as a draft instead.

If you are sure you no longer want a draft:

1. Open it from Draft scenes.
2. Tap the three-dot menu.
3. Choose Delete Scene.
4. Read the confirmation and tap Delete.

Deleting a draft removes that draft from the app. It does not change the three active scenes currently stored on your devices.

Active scenes cannot be deleted while they occupy a device scene slot. To remove one, first replace it with another scene through Arrange Scenes. Once the old scene is in the draft list, you can keep it or delete it.

Delete Draft Scene

Rename scenes from their menu. Only drafts can be deleted, and deletion is permanent.

Why can’t I see Arrange Scenes?

Create at least one draft first. Arrange Scenes appears when you have a draft available.

You can use an existing scene as the starting point for that draft if you do not want to build one from scratch.

Will my drafts move to a new phone?

No. Draft scenes and your custom flash-pattern library are stored locally in the app on your current phone.

There is no export, import, or migration option. You will need to recreate these items on another phone, and deleted app data cannot be restored.

Settings already stored on your devices can be read back after pairing with another phone, but this does not restore your full draft or custom-pattern library.

See Use your Lumos devices with another phone.