How to Pair your Nyxel with Quin to the Quin App

Follow these steps to connect your Nyxel helmet to the Quin app.

Before you start

• Charge your helmet for at least 30 minutes
• Install Quin from the App Store or Google Play and create/sign in to your account.
• On your phone, turn Bluetooth on. For Android, also enable Location permissions for Quin.

Pairing steps

1. Open Quin
   Launch the Quin app and go to Devices (or Add Device)
2. Put the helmet in pairing mode
   Press and hold the helmet’s power button until the status light begins pulsing/blinking (pairing mode).
3. Add the helmet in Quin
   Tap Add Device → choose Lumos Nyxel. The app will search for nearby helmets.
4. Confirm the pairing
   When Nyxel appears, tap it. If your phone shows a Bluetooth pairing prompt, tap Pair/Allow.
5. Wait for the connection
   Quin will finalize the setup. The helmet light will change to indicate a successful connection.
6. Test the connection
   From Quin, try toggling the helmet lights/indicators to confirm everything works.

If a firmware update is offered, let it complete before riding.

What you should see

• The helmet LED pulses while searching, then goes steady/changes pattern when connected.
• Quin shows the Nyxel as Connected in the Devices list.

If you have any other questions, please feel free to reach out to our support team (support@lumoshelmet.co)